• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Nexus Technology, Inc.

Enabling Innovation for 30 Years

MENUMENU
  • Products & Services
        • Memory Analyzers
          • Overview
          • MA5100 Series
          • MA4100 Series
        • Memory Interposers
          • LPDDR5 Mobile Memory
          • LPDDR4 Mobile Memory
          • LPDDR3 Mobile Memory
          • LPDDR2 Mobile Memory
          • DDR5 Main Memory
          • DDR4 Main Memory
          • DDR3 Main Memory
          • DDR2 Main Memory
          • Flash Memory
        • Probes
          • Analyzer Probes
          • Serial
          • Probing Adaptors
        • Serial Analyzers
          • RapidIO Serial Analyzer
        • Services
          • Attachment Service
          • Custom Interposers
          • Custom Software Support
        • Legacy Products
          • Parallel Bus
          • DDR1 Main Memory
          • GDDR5 Graphic Memory
          • LPDDR1 Mobile Memory
        • All Products
  • Technologies
    • XH Series Interposer Technology
    • EdgeProbe™ Interposer Technology
    • Target Socketed Interposer Technology
    • Direct Attach Interposer Technology
    • Electrical Analysis
    • Protocol / Compliance Analysis
  • News
    • All News
    • Videos
    • Press Releases
  • Support
    • Frequently Asked Questions
    • Leave a Message / Create Support Ticket
    • Live Chat
  • About Nexus
    • Contact Nexus
    • Conflict Minerals Statement
    • WEEE and RoHS Compliance
    • About Nexus

New Product

New Oscilloscope Interposer – LPDDR5X 315-Ball EdgeProbe

January 19, 2024 By Nexus Technology, Inc.

Fast, reliable access. Annoucing 8.5 GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 315-ball BGAs.

  • All major oscilloscope vendors supported
  • 315-ball LPDDR5(X) 2×16 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals: EdgeProbe Design
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available
LPDDR5 315 Ball EdgeProbe Interposer

LPDDR5X Oscilloscope Interposer – 315-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-315 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: EdgeProbe, Interposer, LPDDR5, Oscilloscope

Nexus Analyzer Support for JEDEC LPDDR5 Memory Increases to 9600MT/s

June 29, 2023 By Nexus

MA5100 Product Image

Nexus Technology announces support for JEDEC LPDDR5X-9600 on the Nexus Technology MA5100 Memory Analyzer / Logic Analyzer. This increases the acquisition and analysis capabilities of the analyzer which previously supported only LPDDR5X-8533 (and slower). The MA5100 enables designers, implementors, and users to validate, debug, monitor, and optimize their LPDDR5 memory interface.

  • Three Speed Options
    • LPDDR5X-9600 – NEW
    • LPDDR5X-8533
    • LPDDR5(X)-6400 and slower
  • Memory Validation and Debug
  • Monitoring of Bus Traffic
  • Optimization of Memory Performance
  • DDR5 and LPDDR4 Options Available

True Analog Visibility

iCiSTM provides detailed insight of signal quality and expected performance for data acquisition you can trust. More…

MA LPDDR4 iCiS

State Capture

State results include continuous traffic around one or more events of interest and may consist of time, bus commands, bus addressing, margin violations, and trigger events. More…

LPDDR5 Listing

Target Connection

The MA5100 memory analyzer supports connection using standard interposers, flying-lead probes, or with a custom interposer solution. LPDDR5 Interposers / Flying-Lead Probe

LPDDR5 315 Ball Compliance Interposer

Attachment & Testing Services

A typical attachment service includes removing the memory from your target and reassembling the target with an interposer. More…

Attachment Service

Add Oscilloscope Probing

Add oscilloscope probing using an XH series interposer. More…

LPDDR5 441-ball oscilloscope interposer

Need more information? Contact us anytime. We are here to help.

Filed Under: New Product, Press Release Tagged With: LPDDR5, MA5100

New Flying-Lead Analyzer Probe

September 15, 2022 By Nexus

Nexus Technology announces the PRB-FL-20 probe. This probe enables flying-lead connectivity of modern and emerging memory technologies to leading-edge memory analysis systems. Specifically, the probe enables acquisition and analysis of DDR5, LPDDR5(X), LPDDR4(X), and LPDDR6 memory buses using a MA5100 series real-time memory analyzer.

Typically, connectivity is accomplished by using interposers with a single, high-density probe connection and not flying-lead probes. Interposers with high-density probes are often the recommended probing method because they provide better signal fidelity for the considerable number of probe points that must be simultaneously probed. In addition, they provide a more convenient and reliable connection than flying-lead probes. However, there are cases when a flying-lead probe may be preferred. An example is when using a high-speed oscilloscope. This equipment uses an oscilloscope interposer, which does not have a single, high-density probe connection. When an oscilloscope interposer is already attached to a target, there may be a preference to reuse this interposer to acquire data with the real-time analyzer. Two other use cases for the flying-lead probe are emerging memory technologies/form factors and when the target board provides features that allow flying-lead probing connection. In summary, the PRB-FL20 adds additional probing and interposer support for the MA5100 series of analyzers. For more information, you can visit and chat with Nexus at www.nexustechnology.com.

PRB-FL-20
PRB-FL-20
PRB-FL-20 Probe Heads
PRB-FL-20 Probe Heads
PRB-FL-20 Flying Lead Probe

MA5100 Analyzer

The PRB-FL-20 probe is designed for use with Nexus’ MA5100 series analyzer. This analyzer enables DDR5, LPDDR5, LPDDR4 and LPDDR3 performance, margins and capture up to LPDDR5X-8533, LPDDR5-6400, LPDDR4(X)-4267 and LPDDR3-2133. The analyzer’s key features include 1G-Sample acquisition depth, ClockSafe™ and Single Smart Frequency or Sixteen Smart Frequency Analysis. Find more information on the analyzer features at nexustechnology.com.

MA5100 Product Image
MA5100 Series Analyzer

About Nexus

Founded in 1991, Nexus Technology, Inc. is a leading supplier of test and measurement solutions and services for standardized buses with a focus on product and services to assist in the design, debug and analysis high-speed memory buses. Nexus Technology products and services are used worldwide across a wide range companies and industries. No matter where you are in your product development cycle, we have you covered! Visit and chat with us at www.nexustechnology.com.

Filed Under: New Product, Press Release Tagged With: DDR5, Direct Attach, EdgeProbe(TM), LPDDR4, LPDDR5, LPDDR6, MA5100

LPDDR5X Oscilloscope Probing – 441-Ball

February 22, 2022 By Nexus Technology, Inc.

Fast, reliable access. Announcing 8.5GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 441-ball BGAs.

  • All major oscilloscope vendors supported
  • 441-ball LPDDR5(X) 4×32 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available
LPDDR5 441-ball oscilloscope interposer

LPDDR5X Oscilloscope Interposer – 441-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-441 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: Direct Attach, Interposer, LPDDR5, Oscilloscope

New Oscilloscope Interposer – LPDDR5X 297-Ball

July 22, 2020 By Nexus Technology, Inc.

Fast, reliable access. Annoucing 8.5 GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 315-ball BGAs.

  • All major oscilloscope vendors supported
  • 297-ball LPDDR5(X) 2×16 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available

LPDDR5X Oscilloscope Interposer – 297-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-297 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: Direct Attach, Interposer, LPDDR5, Oscilloscope

New Oscilloscope Interposer – LPDDR5X 496-Ball

March 24, 2020 By Nexus Technology, Inc.

Fast, reliable access. Annoucing 8.5 GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 315-ball BGAs.

  • All major oscilloscope vendors supported
  • 496-ball LPDDR5(X) 4×16 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available

LPDDR5X Oscilloscope Interposer – 496-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-496 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: Direct Attach, Interposer, LPDDR5, Oscilloscope

  • Page 1
  • Page 2
  • Go to Next Page »

Primary Sidebar

Copyright © 2025 Nexus Technology, Inc. You are on the **TEST SITE** nexustesttechnology.com